Passive Coaxial Point Source
• Frequency Response: 150Hz-18kHz (+/- 2dB) | 85Hz-20kHz (-10dB)
• Recommended Power Amplifier: 200–300W @ 8 Ohms
• Max. Output: 118 dB SPL
• Drivers: LF: (1) 5”; Exit 1″, Voice Coil Diameter 1”
• Nominal Impedance: 8 Ohms
• Power Handling: 100W Program / 400W Peak
• Dispersion: 70° H x 70° V (Conic)
• Input Connection: (2) NL4 SpeakON Connectors & (1) 2-Position Terminal Strip
• Vertical and Horizontal Yoke Mounting Brackets w/ Tilt Adaptors, Threaded Stud Plates (M10, 3/8-16 & 1/2-13), Pipe Clamp Mount, Chain Rigging Points, VESA Tilt Mount, Array Mode Top-Bar Plates
Passive Coaxial Point Source
• Frequency Response: 100Hz-18kHz (+/- 2dB) | 88Hz-20kHz (-10dB)
• Recommended Power Amplifier: 250–500W @ 8 Ohms
• Max. Output: 128 dB SPL
• Drivers: LF: (1) 8”; Exit 1″, Voice Coil Diameter 1.75”
• Nominal Impedance: 8 Ohms
• Power Handling: 250W Program / 500W Peak
• Dispersion: 8CX-P-100: 100° H x 100° V (Conic) -OR-8CX-P-70: 70° H x 70° V (Conic)
• Input Connection: (2) NL4 SpeakON Connectors & (1) 2-Position Terminal Strip
• Vertical and Horizontal Yoke Mounting Brackets w/ Tilt Adaptors, Threaded Stud Plates (M10, 3/8-16 & 1/2-13), Pipe Clamp Mount, Chain Rigging Points, VESA Tilt Mount, Array Mode Top-Bar Plates
Coaxial, Horn Loaded
• Two-Way Passive
• LF Device: 10in (254mm)
• HF Device: Exit 1in (25.4mm); Voice Coil Diameter: 2.5in (63.5mm)
• Asymmetric Horizontal Dispersion: 90° H at Top, 135° H at Bottom
• 45° Vertical
• Integral Rigging Points
• Durable Polyurea Coating
• (2) EP-4 Connectors (1 Male, 1 Female) & (1) 4-Pos. Terminal Strip
Coaxial Passive (Standard) or Active (Optional), Horn-loaded Loudspeaker, with grille
• Frequency Response: 50Hz–16kHz
• Recommended Power Amplifier: 1000–1200W @ 8 Ohms
• Max. Output: (LF) 131 dB SPL, (HF) 133 dB SPL, (Passive Model) 132 dB SPL
• Drivers: LF: (1) 12”; Voice Coil Diameter 3”
• Nominal Impedance: LF: 8 Ohms, HF: 8 Ohms
• Power Handling: (LF) 350W Program, 700W Peak, (HF) 80W Program, 160W Peak
• Dispersion: 60°H x 60°V (Conic)
• Input Connection: Active: (1) 4-Position Terminal Strip; Passive: (1) 2-Position Terminal Strip
• Integrated mounting points